|
Tue, Apr 1, 08 at 17:25
| Craftsman 1/2 hp unit works perfectly from the wall mounted hard wired button. But no remotes will work. I have tried reprogramming the remotes and it takes. When I click the remote button the green light on the opener itself flashes but the door will not open or close.
So it seems the receiver is getting the signal from the remote but is not telling the unit to open or close. Again the wall switch performs perfectly with one quick push all the way open and closed. Any help? Thanks. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Apr 1, 08 at 18:57
| Check to see if the light in the wall control button is flashing. If it is hold the lock button in for 3 seconds and try your remotes. If you also have a wireless keypad that is not working this will not be your problem. I would then suspect a bad logic board. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.