Return to the Garages/Workshops Forum
| Post a Follow-Up
reprograming if possible
| | |
Posted by
derrick_2008 (
My Page) on
Sun, Apr 13, 08 at 16:20
| I have model# 139 53975srit1 key pad# 031 d0431 iti >pc< 3 and would like to know if it's possible to reprogram my opener. I have a couple of folks I no longer wish to enter my home and need help with this. any advice would be grateful. |
Follow-Up Postings:
RE: reprograming if possible
| | |
| If you want to change the code for your keypad you just need to press and immediately release the smart/learn button on the rear of the motor unit. Near where all those white wires go. Then walk over to the keypad and enter a new 4 digit number and press enter. Should do it for you. |
RE: reprograming if possible
| | |
| okay I found the button and the next question is will my car openers still work? I'd like to know before I do anything? |
RE: reprograming if possible
| | |
RE: reprograming if possible
| | |
| If you hold that button in it will erase the codes and your remotes will not work. Press and immediately release is the key here. |
RE: reprograming if possible
| | |
| okay don the codes have been erased, so how can i fix this problem. |
RE: reprograming if possible
| | |
| the fcc id hbw1255 139.53681b date 04/03 |
RE: reprograming if possible
| | |
| Press and hold the button on your remote and then press and release the smart/learn button. Do this for each remote you have. Do not hold the smart/learn button in or it will erase the codes again. Now follow the instructions I gave your earlier to change the code on your keypad. They are above. |
RE: reprograming if possible
| | |
| thanks don you have been a great help and everything worked. |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in.
If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.
