|
| Ive got a sears craftsman 1/2 hp garage opener (about 6 years old)
All was fine till last night, one of my remotes stops working... So I go out and buy a battery for it thinking that was the problem...didnt work...but what I do notice is when I click the garage door opener control (the handheld one with the 3 buttons) the unit on the back has an indicator that lights up, so apparently its getting a signal but nothing else happens the garage door doesnt open. So I thought I could click this red button on the back of the main unit to reprogram the remote. So I clicked it and the light began blinking 3-4 times, then I held down one of my buttons on the remote and still no go... So not sure what is wrong with the remote... Then to make things worse this morning I go out to my truck which has a built in garage door opener right in my yukon. I click the button on that and nothing works, so it appears that is somehow not working? So I get out of my truck and go to my keypad control on the outside of my garage. I enter the 4 digit codes that I have and click enter and that too doesnt work. What gives ??? |
Follow-Up Postings:
|
| Sounds like the receiver on your logic board has quit working. Could possibly be from lightning in the area. The logic board costs about $80.00 plus labor if you can't DIY. Not good news. |
|
| don: You are definately wrong. I got all of them working except one of my controllers. Is it possible that this controller is bad? I changed the battery on the controller and that didnt work. Jon |
|
| Sorry I've been wrong before but this is the first time I have been definately wrong. I really think the controller that isn't working is okay. You just haven't figured it out yet. Keep trying. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.