Return to the Garages/Workshops Forum | Post a Follow-Up

Sears/Craftsman garage door opener doesn't work

Posted by jiyu (My Page) on
Mon, Mar 20, 06 at 23:05

I moved in this house 18 months ago, it has 1/2 HP garage door from Sears/Craftsman. The remote control looks like
It has been working fine all these times, but it suddenly stopped working 2 days ago.

Here are my terminologies, so you understand what I was walking about:

Opener: the remote control I place in my car, which has 3 rectangle buttons.
Two Receivers: Mounted bottom of two sides of garage door frame
Controler: component on the garage door motor, which has a button (someone called learn button), a green light which lights up when you press the learn button, and 3 terminals with all sorts wires attaches to the.
Wall Unit: mounted on the wall in garage which use to open/close garage door from Garage.

1) I can use wall unit to open/close garage door, so the motor works.
1.5) I made sure the remote was not "locked" from wall unit.
2) Press button on opener, the green light on opener lights up, so the battery in the opener works, it is a brand new battery I put in yesterday.
3) Close door from garage, then immediately standing below the garage door, the door open up again, with garage door light blinking, Could I say the receivers also works?

4) This may not related, but it is worth to metion, there are 2 garage door lights on both side of control unit on the top of garage ceiling. A month ago, one of the light doesn't work, I thought it was a bad light bub, so I changed a new light bub, but it still didn't work. Since the door still works, so I didn't pay much attention. This broken light is on the same side as control unit while all 3 terminals and the learn button are.

5) I did open the opener, there is no switch on the opener.
6) I also unplug the power, and replug in after 5 minutes. It still doesn't work.

My question,

1) If it turns out tht I had a bad opener, can I just go buy another opener (from Sears/Craftsman), can it be easily programed?

2) Do you where I can download Sears/Craftsman opener user manual?

Follow-Up Postings:

RE: Sears/Craftsman garage door opener doesn't work

You've done good so far. There are a couple terms we need to change. The units on each side of the door are called "sensors" and they are working the way they should. The actual receiver is inside the motor unit and could be our problem. Do you have only the one remote hand unit? I think you referred to the hand unit as the opener. You say the green light on the opener lights up when you press the button on the hand unit. Do you mean the hand unit or the small green light near the learn button? Post back and we will go from here.

RE: Sears/Craftsman garage door opener doesn't work

Please help with the insanity! I need a manual for my Craftsman GDO Model 139.53977SRT. Sears will be happy to sell me one for 5 bucks and ship it to me for another 20! I've got lights that don't come on at all, plus I'd like to do some other programming. Is there another source for the manual or all the information I'm looking for?

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here