Return to the Garages/Workshops Forum | Post a Follow-Up

Craftsman 1/2 hp 315 mhz garage opener opens by it selt

Posted by barm (My Page) on
Wed, Mar 28, 07 at 22:45

After purchasing a new opener, it worked perfect for 6 months. After I programmed by mini van's in car opener to open/close the door, it opens the door when there is not reason to do so. I followed the instructions in the auto manual. I had to use the learn button on the opener because of the rolling codes. Why does the door open by it self?

Follow-Up Postings:

RE: Craftsman 1/2 hp 315 mhz garage opener opens by it selt

If this problem started after you programmed the remote in your car I would erase the memory of the logic board and then program everything except the car. If you no longer have the problem you know your car is at fault. You erase the memory by holding the learn button in for 6 seconds.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here