Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Craftsman Garage Door Opener

Posted by sonnydreamer (My Page) on
Wed, Mar 13, 13 at 21:33

re 139.53971SRT When trying to program a second remote I held down the SRT button too long and erased the program in the working remote. I then tried to reprogram the original remote by holding the button while pushing and releasing the SRT button. The indicator light did not flash but started fluttering and then I noticed the lock light on the wall unit started flashing. I reset that and tried reprograming the remotes. NG. I then tried programing the second remote with a fresh battery with the same result. Just for "fun" I pushed the SRT and that started to wall unit flashing again along with the SRT indicater fluttering. Any ideas ?


Follow-Up Postings:

 o
RE: Craftsman Garage Door Opener

Chamberlain made that opener. Their support is excellent.

Here is a link that might be useful: Chamberlain


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here