|
Fri, Mar 16, 07 at 20:51
| Hi Everyone -
I have a shed in my backyard made by Heartland, and I am turning it into a "finished room". I'm brining in electricity with a new circuit box, outlets, lighting, etc. I was wondering what I should do about security.. Theres going to be a TV, computer, Web casting equipment, etc. My doors are NOT flush. The right side door goes over a gap on the left side door. So to open the left side, I first have to open the right, then open the left.. Kind of like some trucks. My question is, what should I do about locks? Thanks, Jay |
Follow-Up Postings:
|
| Throw bolts into the top frame and floor on one side and a hasp lock on the other door. I'd put pins into the hinges so they cannot be removed and the door taken off. Or get special hinges where the pins cannot be taken out. I would put motion sensor lights on it, high up, so no one can remove the bulb. Ron |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.