|
Mon, Mar 5, 07 at 17:56
| Just installed a new .5 hp Genie screw drive. After everything is connected, STB showing the right colors, I press the wall button to open it for the first time. All that happens is the lights come on and a 1 second buzz sound, like I got the answer wrong in a game show. The door works manually. The wall control is a one button, otherwise I would suspect something is locked. Thoughts? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Mar 5, 07 at 19:13
| I would start at step #1 and make sure I followed every installation step exactly. Sounds like you may have missed something along the way. |
|
| Double check the way you put together the screw drive. Make sure the coupler that connects the motor to the screw shaft is correct. Sounds like something is not right with the way the shaft is put together. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.