Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Werner attic ladder no square

Posted by trubrit (My Page) on
Fri, Mar 21, 14 at 17:55

I am installing the Werner AH2510B Attic ladder. This ladder is replacing an older wooden one that was installed with the house back in 1969. So there is no cutting etc. Simply a removal & replacement job. After installation, the door has a gap on the right side and is not square. I have tried tightening/loosening lag bolts and using shims to no avail. ..
That piece of wood you see is one of 2 holding the stairs up while I adjust the unit with screws/bolts.

Thanks!


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here