Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Liftmaster Professional 1/2 HP Door Opener Stuck

Posted by techdesigner (My Page) on
Tue, Mar 6, 07 at 16:01

I pressed the button to activate the Liftmaster Professional 1/2 HP garage Door Opener and it makes a click and starts the motor then stops. I thought the door was stuck so I unhooked the chain and tried the button again and the gear turns 1/8 inch and stops. There is no safety electric eye 6in from the floor. I did find a small gray push button I assume is a reset and tried unplugging to reset. Anyone have any ideas on replacing parts or do I just have to repace the door opener?

Thanks,
Greg


Follow-Up Postings:

 o
RE: Liftmaster Professional 1/2 HP Door Opener Stuck

Take the cover off and check the drive gear. It is white nylon just in front of the motor. You may find it is stripped.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here