|
Tue, Mar 4, 08 at 13:41
| Hello,
I have a sears 1/3hp model: 139.663801 The car garage door opener just stopped working. How do I change the code to get it working again, or how do i program a new one? any help would be much appreciated |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Mar 4, 08 at 15:23
| If you have the original remote and receiver for this opener you will find a set of dip switches inside each one that can be changed to change codes. Whatever you do to one you must duplicate on the other. The remotes and receiver for this unit have been 'no longer available' for a long time. Changing codes doesn't normally make these things start working again. |
|
- Posted by derrick_2008 (My Page) on Sun, Apr 13, 08 at 15:58
| I have a 1/2 hp garage door opener and I would like to re-program the code, I want to do this as there are a couple of people that have my code I no longer want in my home. Is there anyway for me to do this. All the help would be great. modle no# 139 53975srit1 |
|
- Posted by don_1_2006 (My Page) on Sun, Apr 13, 08 at 17:52
| see above. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.