|
Fri, Mar 24, 06 at 13:37
| I want to repair a garage floor and put on an epoxy or paint. The floor has several spots that are cracked and it looks like salt may have had something to do with it. The damage is mostly right where the cars park. As far as I can tell, it has never been sealed. Can I clean the surface, use a etching compound and put some type of self leveling filler over the top to fill in the voids? |
Follow-Up Postings:
|
- Posted by maryland_irisman (pat969@aol.com) on Mon, Mar 27, 06 at 19:13
| You could do that. If it's not a large area, I think I'd go with top and bond. You'd have to prep it pretty much the same as a leveler but I think it would be a little less expensive since you'll be sealing it anyhow. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.