Return to the Garages/Workshops Forum | Post a Follow-Up

 o
how to replace halicon gear

Posted by tinki (My Page) on
Fri, Mar 29, 13 at 11:08

OOPS!! THAT SHOULD BE HELICAL GEAR
The drive gear has stripped in my "overhead door" brand garage door model # 556.
Can someone please tell me how to remove the gear ?
I have read manual , it says there are 2 cotter pins, I only see one hole with no pin in it.
I have the part and need help.

Thanks for reading.

This post was edited by tinki on Fri, Mar 29, 13 at 11:46


Follow-Up Postings:

 o
RE: how to replace halicon gear

That should be Helical gear replacement


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here