|
Wed, Mar 3, 10 at 10:52
| i recently placed the gears in my sear 1/3 Hp garage door opener model 41A3189, after the unit was re-installed the remotes would not work the hard wired activator works fine, i changed the code and matched up the remotes to it, the led on the remotes light up, still not working i also replaced the batteries, i then checked the antenna connection for cracks. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Mar 4, 10 at 19:11
| If the remotes worked before you replaced the gear then something was done in that process. I would check the logic board for loose connections. It is fairly common. Check the wiring to make sure something wasn't accidently loosened. The model number you give is actually the part number for the logic board. The actual model number is on the opposite end of the motor unit. |
|
- Posted by installer2 (My Page) on Sat, Mar 6, 10 at 21:16
| Check to be sure vacation switch is not activated on wall switch! First |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.