I replaced a worn gear and rpm sensor that broke and now the door only opens 6 inches and then reverses 6 inches and stops. Have made endless amounts of adjustments still to no avail. help
Make sure you put the black cup back on the end of the motor shaft and that it is pressed all the way on. Make sure the RPM sensor is plugged in. If neither of these are the issue, then you probably did not have the motor shaft pushed all the way back when you tightened the coupler after replacing the worm gear. Loosen that coupler up and from the front of the motor (opposite end in which the coupler is on) push the shaft back as far as it will go. Hold it there while you tighten the coupler back up and then try it.
don_1_2006
Related Professionals
Cloverly Accessory Dwelling Units · Centerville Interior Designers & Decorators · Van Wert Interior Designers & Decorators · Casas Adobes Cabinets & Cabinetry · Country Club Cabinets & Cabinetry · Langley Park Cabinets & Cabinetry · Canton Cabinets & Cabinetry · Crestline Cabinets & Cabinetry · Jeffersontown Cabinets & Cabinetry · Land O Lakes Cabinets & Cabinetry · National City Cabinets & Cabinetry · Plymouth Cabinets & Cabinetry · Potomac Cabinets & Cabinetry · Watauga Cabinets & Cabinetry · North Bay Shore Cabinets & Cabinetry