|
Sat, Mar 19, 11 at 1:35
| I thought I had posted this message yesterday but now I can't find it anywhere so I assume I didn't do it right. Here goes again. I have a 1/2 HP Craftsman Opener that was installed by the previous owner when my house was built in 1985. He didn't leave me an owner's manual and I can't find a model number anywhere on the unit. Two days ago it stopped responding to the remote. It works fine with the hard-wired wall unit. I got a new remote, transferred the code switch settings from the old remote, verified them with the unit itself - still no response. So, I assume the problem is with the receiving module on the unit. I can't get anywhere with Sears without a model number. Any suggestions? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Mar 21, 11 at 16:25
| If the wall unit has 3 buttons and the light in it is flashing, press and hold the lock button for 3 seconds. If this is not the case your receiver has quit. It is part of the logic board. You would be better off with a new opener at this point. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.