|
Tue, Mar 13, 07 at 0:25
| My Genie Pro 88 is about 18 years old.
Suddenly it seems to only open. To close it, I must pull the emergency handle to disconnect it, then close manually. However, if I reconnect the mechanism once the door is closed, it opens just fine. If the door is in the open position and I activate the button (either hard wired or remote), absolutely nothing happens. The motor just doesn't come on. Anyone have any ideas? |
Follow-Up Postings:
|
| Bad circuit board and it is not available anymore. I would replace it with a craftsman or liftmaster belt of chain drive. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.