|
Sat, Feb 4, 12 at 20:02
| I have a Sears 1/2hp garage door opener that has no passcode reset button. Any Idaes on how to change my passcode. I have a 139.53876 wireless keypad. |
Follow-Up Postings:
|
| What is the part number of the GDO? Do you still have the owner's manual? It may be available on-line from SearsParts. Their 1-800-252-1698 help line might be of assistance. |
|
- Posted by don_1_2006 (My Page) on Mon, Feb 6, 12 at 9:50
| Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to the keypad and key in any 4 digit code you like and press enter. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.