Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Craftsman Keyless Entry Pad, Security+ not working

Posted by patriot_ne (My Page) on
Sun, Feb 10, 08 at 17:45

Hi:

I have the following Craftsman Security+ keyless entry pad that is new, it was purchased in 2001 but never opened from the shrink wrap. When I put a new battery in, it does not seem to work, even the keypad lights do not come on. And I am not able to set password or open the garage doors.

Craftsman Keyless Entry Pad, Security+
Sears item# 00953684000 Mfr. model# 53684

Please let me know if there is some thing to set or reset on this keypad to get it to work.

Thanks.


Follow-Up Postings:

 o
RE: Craftsman Keyless Entry Pad, Security+ not working

It sounds like you have a bad keypad. There is nothing to set or reset other than the code itself. If it doesn't light up when you key 'enter' it is most likely bad or your battery is bad.


 o
RE: Craftsman Keyless Entry Pad, Security+ not working

or the battery contacts are corroded/oxidized


 o
help...craftsman 1/2 hp model 139.53970srt..help

I purchased & had a Craftsman 1/2 hp Model 139.53970SRT installed in 2002. My problem is when I program my new craftsman wireless keypad for ouside my remotes that came with the unit will not work. I can only use one or the other. Sears hardware personal are confused. My garage door opener has a orange learn button. prior to this I tryed both clicker & genie wireless keypad and the same happens. Thank You....


 o
RE: Craftsman Keyless Entry Pad, Security+ not working

Sounds like you are getting the wrong keypad. Make sure the model number on your opener is correct and have Sears parts look it up for you.


 o
RE: Craftsman Keyless Entry Pad, Security+ not working

I accidentally deleted all codes on my garage door opener when I setting up a new remote and now don't know how to set a password for keyless entry pad - I have no instruction manual since it was installed by previous owner.


 o
RE: Craftsman Keyless Entry Pad, Security+ not working

Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to the keypad and key in any 4 digit code you like and press enter


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here