|
Thu, Feb 7, 13 at 16:54
| I power washed my garage floor then put grey epoxy on it. I let it dry for 3 days. The first time I drove my car in it left tire marks. There are also places that are white. The grey crumbles right off. What did I do wrong and how can I remedy it? Thanks |
Follow-Up Postings:
|
| Did you etch the floor? Did you buy good epoxy paint? |
|
| I used Kwik Kote epoxy from Lowes. It's what I used a few yrs ago and it worked fine. I'll look up etching. Thanks |
|
- Posted by hollysprings (My Page) on Wed, Feb 20, 13 at 23:24
| Did you remove any grease? Etch it? Let it dry for 48 hours before coating? Thoroughly mix up the paint? This sounds like a prep problem. Most paint issues are. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.