Return to the Garages/Workshops Forum | Post a Follow-Up

Sears GDO Security + Keyless Entry

Posted by dlmsr830 (My Page) on
Sat, Feb 17, 07 at 15:55

Model No. is 139.53684

Keyless entry works if you are within 6 inches of the antenna wire attached to the GDO.

If you are farther away, the keyless entry will not open or close the door.

Have tried resetting the four digit code and changing the battery but still have the same problem.

Any suggestions?

Follow-Up Postings:

RE: Sears GDO Security + Keyless Entry

Are you having remote problems as well?

RE: Sears GDO Security + Keyless Entry


No, my remote is working fine.

RE: Sears GDO Security + Keyless Entry

IF your remotes are working fine I would have to say the keypad is going bad on you.

RE: Sears GDO Security + Keyless Entry

Thanks, doorguy06.

I will buy a new keypad and give it a try.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here