|
Sun, Feb 27, 11 at 14:14
| My locking light continues to blink on the Premium control console of my Craftsman 1/2 HP model 139.53975SRT1. I lose my remote use and my keylock use after a day or so. My safety reversing sensors are solid amber and solid green. I can reprogram everything but it fails after a day or so. I press the small lock button for two seconds to unlock the console but it doesn't unlock. I have unplugged the power from the unit and restarted everything to no avail. Anyone else run into this problem. It all started a week ago when the door came down on a shovel that was in the way. The door stopped properly and went back up and that's when my problems started. The blinking light is very rapid. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Mar 1, 11 at 10:00
| You may have a bad console. You can eliminate this temporarily by removing the wire that goes to terminal #1 on the rear of the motor unit. You may also have to program your remotes. Normally when the lock function is on the keypad continues to work. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.