|
Wed, Feb 13, 08 at 11:44
| The outside push button control will close the door when the code is entered, but will not close the door. I replaced the 9v battery with no change. Everything else works ok. Any suggestions what to do next? |
Follow-Up Postings:
|
- Posted by gmagic911x (My Page) on Wed, Feb 13, 08 at 14:16
| CORRECTION: The push button control will not open the door; however, it will close the door if it has been opened by the wall button or a remote. |
|
- Posted by don_1_2006 (My Page) on Wed, Feb 13, 08 at 19:24
| It sounds like you have lost range with the keypad. The closed door may be adding enough resistance to shorten it even more. It will most probably involve a new keypad. |
|
| if your remotes have the same range as always , and another new battery doesnt help, clean battery contacts in keypad. if still no go , replace. YOu can test new remotes without opening package, unfortunately you cant test a keypad same way LOL |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.