|
Wed, Feb 6, 08 at 11:23
| I have 2ea sears 1/2 HP, model#139.53627SRT units. Both units will not close without holding the wall button down.
They will move briefly and stop when closing using the remotes. The sensors are clean and aligned. There is no problem opening using the remotes or wall button. Only when closing. Also, the light does not function any more on one unit. They are about 14 years old... Any recommendations? Thanks |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Fri, Feb 8, 08 at 18:33
| If the main light flashes 10 times when the door reverses or you can hear the relay click 10 times then you have sensor problems. |
|
| Are all four sensor led's lit and not flcikering, does the problem happen at night too? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.