|
Sat, Feb 10, 07 at 10:06
| I have a Craftsman (Chamberlain) garage door opener (model number 1265) that has two problems.
First, the remote opener will open the door, but will not close the door. I've replaced the batteries and the problem remains. Second, I have to press and hold down the wall-mounted controller for the door to close. (The door will open properly by pressing the white pad) Any suggestions? |
Follow-Up Postings:
|
| Your photo eyes are out of alignment. They are mounted at the bottom of the door adjust them until you get a solid green light. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.