|
Thu, Feb 5, 09 at 9:38
| After a power outage of 7 days my sears model number139.53535SRT, Part#41A4315 6C does not close. I have hooked the door back to work in the normal way (with the motor)hit the button it shuts them opens right back up. It will not stay down.
Anyone have some advice. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Feb 5, 09 at 17:07
| Does the main light flash 10 times? If so it is a door sensor problem. Make sure they are pointed at one another and the small light on each one is on and not blinking. If the door is hitting the floor and then reversing you will need to adjust the 'down limit' which you will find on the side of the motor unit. Turn it in the opposite direction of the arrow printed on the cover. Some tweaking will probably need to be done. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.