|
Wed, Jan 28, 09 at 22:14
| It is model 139.18847. The part is shown in the owner's manual as number 17 - shaft bearing kit. The shaft bearing kit has several pieces - bearng, washers and collar. The piece that broke is the bearing. It is (or would be if I could get it in place without breaking it) closest to the worm gear. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Jan 29, 09 at 16:59
| You may need to file any burrs on the motor shaft. Other than that the bearing should slide on and off with ease. |
|
| OK thanks. My neigbour gave me a spare bearing. I will make sure the shaft is smooth before putting the new bearing on. Much appreciated! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.