|
Sat, Jan 17, 09 at 22:06
| I have a Model 139.53684 key pad, I tried to install it awaile back. Never got it to work. Now I would like to try
again. I forgot code I was using. Anyway to start over with new code No. thanks for any help. Alvin |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Jan 19, 09 at 10:10
| Find the smart/learn button on the rear of your motor unit just to the left of all those white wires. Press and immediately release it and then walk over to your keypad and key in any 4 digit number and press enter. If you have the correct keypad for your opener it should work. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.