|
| I am trying to fix my parents garage door problem and have to admit that I don't know much about it. They have two garage doors both powered by Sears Craftsman garage doors (one about 10 yo the other 6yo). The wireless keyless entry pads on both garage doors were failing in the cold weather and I tried to replace them with two Craftsman #53876 Keyless entry pads.
I replaced the first keypad, no problem. The second keypad, I programmed (I had to use a different pin or else it would open the first door) and it would open/close the door. The problem was that the remotes stopped working. I tried to reprogram the remotes and then they would work, but the keypads wouldn't. How can I get this programmed so both the keypad and remotes work for this garage door opener? It's like they're operating on different frequencies. Also,
|
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Jan 8, 07 at 12:40
| There is a chance you got the wrong keypads for the openers. Did you buy from Sears? Take the model number off each motor unit and you can verify with Sears parts. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.