|
Wed, Jan 3, 07 at 20:16
| With the above model I have recently experienced failure of closure of the door with return to open position. I have no manuals as the unit was present when I bought my home. I have identified the LED's with buttons F+ and F-; how may I adjust these correctly to allow the door to close?
I would greatly appreciate any help. Regards, Alex Sobel |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Jan 4, 07 at 17:52
| It sounds like your door sensors could be mis-aligned. Tweak them and see if that helps. I wouldn't advise adjusting any controls until you hear from someone that is familiar with your model. |
|
| My Dad is having the same problem with his model 556 opener. Have you fixed it? What did it take? Thanks, |
|
- Posted by don_1_2006 (My Page) on Wed, Jul 11, 07 at 18:35
| Who makes this model 556 opener? That might help. |
|
| awsobel, Looked for this opener online and could not find it. Will the opener work with the door disengaged? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.