|
Mon, Jan 18, 10 at 19:03
| Ihave a Chamberlain 41A4252-7A (Model 4100) that will not open or close with wall button or remote. The light in wall button, sensors and light bulb do not light either. Left it unplugged for several days and when I plugged it in the lights all came on. Hit the wall button and it tried for a split second and all lights went out again. Pressing the green button for six to ten seconds did nothing. None of the lights came back on. Do we think its the board? If so are there schematics available for this board there is not much on it to repair. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Jan 19, 10 at 9:39
| Sounds like you may have a shorted wall control or the wiring going to it. I would disconnect them and see if your problems goes away. |
|
| Had a short but not the wall control. Took a magnifing glass and noticed the solder on one leg of the transformer was cracked, added a touch of solder to it and it works fine now! This is a 1994 unit and all those years of use must of cracked it. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.