|
Sat, Jan 24, 09 at 18:04
| I just replaced the large drive gear 41A2817. When I press the transmitter the door goes up 2 feet and immediately reverses itself by the same distance. I played around with the adjustment screws but nothing changes. What is causing this to happen and what should I do to get it running?
Thanks,
|
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Sun, Jan 25, 09 at 14:00
| Take a good look at the spring above the door to make sure it isn't broken. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.