|
Tue, Jan 16, 07 at 16:59
| I installed a new Craftsman 139.53985D garage door opener. Everything works great except for the 3 button keypad. The open/close button works fine. But the other two buttons, lights and lock buttons, act just like the open/close button. I've double check the wiring and everything seems to be in order. Any help with my problem would be most appreciated. Thanks. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Jan 16, 07 at 17:18
| Sounds to me like you have a bad wall control. Check with Sears about your warranty. They may just mail you a new control. I would try to get a free service call if possible. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.