|
Fri, Jan 19, 07 at 16:04
| Please disregard previous cry for help. I've solved the problem of getting the remote prgrammed. Apparently the instructions on my opener unit are misleading. I found a Sear's help number 800 528 5236 that gave me clear instructions on how to program the unit. My unit said to hold both the TX button and RX button till the lightbulb blinked--but it never would. The help line told me to press the red receiver button and release when the LED was steady. Then within 30 seconds press the remote TX button and hold till the light bulb flashed. It worked much better that way and I am back in business. Thanks for listening. Dalila |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Fri, Jan 19, 07 at 19:19
| Okay |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.