|
Sun, Jan 27, 08 at 15:38
| My Craftsman Garage Door Opener (139.53976SRT) works fine except for the motion detecting wall control. The remotes and keypad will open the door but the hardwired wall control will not. The indicator light on the control blinks 5 quick times, pauses then binks 5 quick times - continually. The lock switch will work as will the motion detecting light switch. The push button to open the door does not work. What are the blinking lights telling me? The part number of wall console is 41C0472-1. I can ground the bell wire and the door will open and close so it is some fault in the wall console. We had a short power failure prior to this happening.
Thanks |
Follow-Up Postings:
|
| I have no idea what the five blinks mean. I have never encountered this problem. However if the opener works fine from all other devices and when you ground the bell wire the opener works fine, then all problems point to the wall button being bad. I would replace the wall button. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.