|
Wed, Jan 3, 07 at 14:22
| I have a Craftsman Garage keypad and I need to know how to program it with my own code. It only has the number pad and enter. There isn't a "learn" button. And the only screw on the device is over the battery cover. Anyone know how to reset this thing with a new code? thx |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Jan 3, 07 at 16:23
| I'll assume it is a wireless keypad. The "learn" button is on the rear of your motor unit to the left of where all those white wires go. Press and immediately release this button and then walk over to the keypad and key in any 4 digit PIN of your choice and press enter. Should do it for you. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.