|
Sat, Jan 17, 09 at 13:34
| I have just replaced the door opnere spindle, due to the teeth were srtipped due to frozen door.
After I replaced the spindle gear, the garage door would not operate. It would close, then come back up and the glide bar would lock up at the bolt in the rail. I pressed teh operation button and teh motor tried to start but did not operate and the green light on the back of the opener blinked green. I re-adjusted the chain tightness several times, with no avail. Is there another problem showing up? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Jan 19, 09 at 10:19
| It sounds like the up and down limits need to be adjusted. To start, turn them about 3 turns in the opposite direction of the arrows printed on the cover. This should get things going and then some tweaking will need to be done. Notice that the arrows point in opposite directions. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.