change PIN for keyless entry transmitter

15 years ago

I would like to change PIN for keyless entry transmitter (#18755). Note: I have followed online instructions which include pressing an "enter" button. However, this 1980s devise doesn't have an enter button to push after entering a PIN. Need help.

Comments (6)

don_1_2006
15 years ago
Check your other post.
herbi
Original Author
15 years ago
what other post? i think i've only posted this one issue. pls elaborate.
Related Professionals
Bel Air North Interior Designers & Decorators · Lake Elsinore Interior Designers & Decorators · Little Egg Harbor Twp Interior Designers & Decorators · Morton Grove Interior Designers & Decorators · Ridgefield Park Interior Designers & Decorators · Liberty Township Interior Designers & Decorators · Dover Cabinets & Cabinetry · Ham Lake Cabinets & Cabinetry · Kaneohe Cabinets & Cabinetry · Mount Holly Cabinets & Cabinetry · Prior Lake Cabinets & Cabinetry · South Riding Cabinets & Cabinetry · Warr Acres Cabinets & Cabinetry · Wilkinsburg Cabinets & Cabinetry · Milford Mill Cabinets & Cabinetry
don_1_2006
15 years ago
Good question. I can't find it now either but I did ask you a question and I will again. Is your keypad hardwired?
herbi
Original Author
15 years ago
yes..keypad is hardwired to another transmitter which also operates the garage door and is located just inside of garage door.
don_1_2006
15 years ago
Okay we can do it now. Follow these instructions.

First unplug the garage door opener from the electrical outlet. Next remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next enter your desired four-digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.
herbi
Original Author
15 years ago
Success! and this didn't cost me a penny and the landfill site must be happy too!

thanks Don.