|
Fri, Jan 30, 09 at 11:20
| Hi all,
First off, great forum, thank you - I have learned a lot. With regards to this specific post, I need to rerun wires from the wall to the opener. Is there any specific type of wire that I should be using for this? Thanks.
|
Follow-Up Postings:
|
| Any type of bell wire will do. |
|
- Posted by don_1_2006 (My Page) on Sat, Jan 31, 09 at 14:28
| If you are running wires from the wall control to the motor unit you need to follow the color code. The wires don't need to be color coded as long as you remember which is which but it wouldn't hurt to use a little fingernail polish for future reference. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.