|
Sat, Jan 10, 09 at 10:32
| I have a Genie Series IS, ISL, IC (With Intellicode remote). The remote will no longer open the door, unless it is within 10 feet, or so of the motor drive. The problem has been slowly getting worse over the past year. The Owner's Manual simply says to "replace the remote battery" if this occurs. This does not help at all. I even verified the battery is good with a volt meter.
My thought is that the opener frequency has shifted due to the aging of the components. It appears that there is no frequency adjustment that is "user friendly". There are several electronic components in the opener with adjustment slots, but the circuit board must be removed to access them. (I removed the cover to the electronics on both the remote and the opener). Any ideas short of buying another opener? I think this one is about 5 years old Thanks. --Nate |
Follow-Up Postings:
|
| It is either the remote or a bad circuit board. Genie circuit boards are notorious for having problems with them. I would buy the remote first it is cheaper. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.