|
Tue, Jan 1, 08 at 5:48
| The lights on my GDO should light when I enter the garage through the garage door but they don't, but I can turn them on from the push button.
Also, both bulbs are new but only one bulb lights. I have a Craftsman GDO. Any ideas? Thanks |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Jan 2, 08 at 14:12
| The feature of the light coming on when you walk through the door is toggled by holding the light button on the wall control in for 10 seconds. Some of the newer bulbs do not make contact in the light socket. Try changing the 2 bulbs around to see if this may be the problem. You can also pull out on the center contact in the socket if you disconnect the power first. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.