|
Tue, Dec 1, 09 at 11:25
Hello, my daughter knocked over her lamp and the bulb burnt her oak nighstand. Any ideas on how to get this burn mark out without damaging the furniture (& finish hopefully)! Thank you.
 |
Follow-Up Postings:
|
- Posted by bobsmyuncle (My Page) on Tue, Dec 1, 09 at 21:34
| You have to remove the charred material, that means you are going to remove most of the finish. You can try rubbing with a scotch-brite pad, but I wouldn't get my hopes up. |
|
- Posted by louisianalover (My Page) on Mon, Dec 7, 09 at 23:23
| My young daughter once put a hot pan on my oak coffee table and it left a heat/burn mark. I was able to find something at my local hardware store that I tried and it worked to get the burn mark out of the wood. My coffee table has a shiny surface to it -- not like yours which looks like a matte finish. However, I would try it -- you never know. The product came in a little white plastic jar and it was called JASCO 0240 Furniture White Ring Remover. It states that "heat and water marks disappear." On the back of the jar it states JASCO Chemical Corp., Santa Ana, CA 92701. It is just a treated cloth that you rub in the direction of the wood grain until the spot disappears. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Furniture Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.