|
Sun, Aug 23, 09 at 8:46
| I have just recently finished restripping and staining a dining room table top. The stain took fine and dried evenly. When I varnished the table top the vernish did not dry evenly. There are like little holes or blotches in the finsih all over the table top. I sanded the top and varnished a second coat and the same thing happened. I then restripped the entire top to bare wood. Restained the top and when I varnished the same thing happened again. I am at wits end as to why this is happening. I refinished the chairs with the same stain and varnish with no problems. Please help |
Follow-Up Postings:
|
- Posted by bobsmyuncle (My Page) on Sun, Aug 23, 09 at 12:14
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Furniture Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.