|
Wed, Nov 9, 11 at 9:10
| Our master bathroom is approximately 12'x 20'. The overall main tile on this floor will be 14"x14" staggered. We have a 6'x6' area in the entrance where we want to put a tile "rug." The center of this "rug" will be 7"x7" tiles set on the diagonal with a border of flat random stones (the kind that are set on mesh). That will be bordered by 7"x14" tiles. The 14x14, 7x14, and 7x7 will all be the same solid tile. My question is, should that border of flat random stones be 3" wide or 4" wide? |
Follow-Up Postings:
|
- Posted by weedyacres (My Page) on Thu, Nov 10, 11 at 18:07
| If it helps envision your project, here's a photo of our ~6'x9' tile "rug" in our foyer, with a 4" border. Inside tiles are 12", outside ones are 16".
|
|
- Posted by functionfirst (My Page) on Mon, Nov 14, 11 at 13:09
| Thanks, it helps a lot! And it's beautiful. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Flooring Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.