|
| Oak Threshold � Sealer? How to protect / treat?
Hello I just had a new vinyl floor installed in my kitchen. I removed the oak threshold so that the installer could run the vinyl under the threshold. The threshold cracked in a couple of places when I removed it. I just went to the lumber yard and purchased a nice new threshold. It is a beautiful piece of oak and measures 4-5/8" and I 5/8" thick. I would like to treat the oak threshold before I install it and was wondering what I should use? A sealer? I don�t want to stain or paint it or change the color, just and to seal it to protect it. What are the better products on the market for this? Sikkens? The threshold is an exterior door to my kitchen. The onside part is sheltered and the threshold never sees rain or direct sunlight as there is an enclosed (tunnel like) pathway to the door. Nevertheless I would like to protect it as it could get wet as I often hose off the area around it. Thanks |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Flooring Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.