Return to the Flooring Forum | Post a Follow-Up

 o
1/3' tile and 5/8' hardwood flush transition?

Posted by brickhouse (My Page) on
Mon, Sep 19, 11 at 15:42

I have thought on this until my brain hurts, I figure there are people here who are much more talented than I am and can do this sort of thing in their sleep.

1/3" thick tile and 5/8" engineered wood floor. What backer board and depth trowel can I use to make them flush or level or darn near?

Thanks!


Follow-Up Postings:

 o
RE: 1/3' tile and 5/8' hardwood flush transition?

I used a wood transition strip that matches the hardwood where it meets the slate entry, there was about a 1/4" difference in level, but you would never know it with the transition strip there. Lumber Liquidators should have something you can use


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Flooring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here