Return to the Flooring Forum | Post a Follow-Up

 o
installing used hardwood floors

Posted by sdsnell (My Page) on
Sat, Aug 4, 12 at 0:31

We are new to this site and we are hoping someone will have some help on a situation: our neighbor recently replaced her hardwood floors and offered to give us her original hardwood flooring. It had been stapled down, so some damage, especially to parts of the edges that lock together, but we are hoping we can replace our laminate flooring with the used hardwood flooring. It is 3/4" oak. Can this be done? We have a slab foundation and were hoping to glue the hardwoods down. I like the finish of the hardwoods - they are hand scraped and the stain has quite a bit of variance in color. If we are able to do this, will we absolutely need to refinish them, or can we use them as is? Thanks in advance for the advice!


Follow-Up Postings:

 o
RE: installing used hardwood floors

The NWFA guidelines do not recommend gluing 3/4" hardwood to concrete.Concrete always has some moisture in it if it is less than 4 1/2% measured with a moisture meter could be ok BUT biggest problem is getting 3/4" straight enough to stay together until the glue dries. Would suggest if you can get them to come together tightly use Bostik all in one adhesive as it will prevent up to 95% moisture from coming in contact with your hardwood floor.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Flooring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here