Return to the Flooring Forum | Post a Follow-Up

 o
old glue, remove? do we need to for laminate?

Posted by treasureforu (treasureforu@yahoo.com) on
Sun, Jun 20, 10 at 21:59

Hi,
We are planning to install a laminate floor on concrete and adding the extra layer of moisture barrier protection. We removed a small area of hardwood by the front door that was put down when the house was built about 12 yrs ago. That floor was glued down so do we need to remove the glue before we start laying the moisture barrier? Do we need to remove all of the glue or just the ridges that it left? Any help will be greatly appreciated!


Follow-Up Postings:

 o
RE: old glue, remove? do we need to for laminate?

No it is not required to remove it, especially if you are using a good thick underlay


 o
RE: old glue, remove? do we need to for laminate?

What kind of moisture barrier do you mean here?


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Flooring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here