Return to the Flooring Forum | Post a Follow-Up

SANDING away the dirt on vinyl flooring

Posted by valerieann2 (My Page) on
Tue, Apr 2, 13 at 19:08

This is kind of a strange question/idea. . . . We've lived in our condo for almost 14 years, along with a 70s style kitchen that I've tried to make the best of without redoing the whole thing. (Definitely not in the budget!) But the vinyl floor is the bane of my life. It has these little pits and grooves in it and over time, all the dirt has settled quite comfortably in the pits and grooves.

So, once, I said to my husband (who works in a hardware store and knows a fair amount about these kinds of things), "Why can't we just sand off a very thin layer of the floor, leaving behind a like-new, clean surface?" He said it wouldn't work, although he tends to be a naysayer when he doesn't want to deal with something or bother to look it up on the internet :-)

Today I took some sandpaper (it was in a drawer - no idea what grade it was) and sanded over some yellowish stains that haven't come off any other way. Presto - gone! Then I found a couple of small, especially dirty areas and sanded a little - not as much as I would for real, but just to see if my theory could work. It seemed to work.

So my idea is to use an orbital sander (too hard to control one of those floor sanders) and, well, like I said, sand off a thin layer of this disgusting vinyl sheeting floor. Does anyone have any thoughts, pro or con, about this idea? Can you foresee any problems? I'm truly at my wits end about this floor. Thanks!!

Follow-Up Postings:

RE: SANDING away the dirt on vinyl flooring

Much like a car finish is buffed... It might work but I'd be worried about doing permanent damage to the floor and make it more prone to staining in the future if you sand through the wear layer. You'll likely loose any gloss too.

Years ago I had a vinyl floor that was very dirty. I tried all kinds of things, including using a ScotchBrite pad on a sander. Nothing worked. Then I bought some commercial floor stripper. Worked like a charm!

Here is a link that might be useful: 3M Floor Stripper

RE: SANDING away the dirt on vinyl flooring

You are going to wish you never did that. You are removing the finish and now everything is going to stick to that floor, stop it.

RE: SANDING away the dirt on vinyl flooring

Thanks for the tip about the 3M stripper! Do we need some kind of special equipment to use this, or just a mop and/or what-have-you? Thanks!

RE: SANDING away the dirt on vinyl flooring

Have you tried a steam mop? We made the old vinyl in a past rental home look like new with a steam mop, go over it slowly it gets out all the dirt.

Vinyl has a protective layer on top if you sand that off you will end up with a very dirty, stained floor, fast.

RE: SANDING away the dirt on vinyl flooring

There isn't any special equipment required for the 3M stripper. Do understand that it's not cheap and you'll likely have more than you'll ever need. You might also consider checking with a local janitorial supply house for other alternatives.

RE: SANDING away the dirt on vinyl flooring

Vinyl floors are available for as little as 49 cents a square foot. Even that modern cheap vinyl is head and shoulders above the vinyl that you are dealing with. And it will actually be cheaper to replace what you have rather than trying expensive products to make what you have acceptible. It will be the best option for both short term and long term costs and maintainence.

RE: SANDING away the dirt on vinyl flooring

Before doing anything drastic, get on your hands and knees with a scrub brush, a rag, an old towel, and 2 buckets. One bucket with cleaner, one bucket of water to rinse, towel to dry. I like Mr. Clean for my floors. If that doesn't work try Dawn dish detergent (cuts grease).

I just did this in my foyer and could not believe how dirty the water was. I usually just damp mop, but once in a while you do need to scrub.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Flooring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here