Return to the Fireplaces Forum | Post a Follow-Up

circulating heat from my Breckwell Big E

Posted by gitser (My Page) on
Sat, Dec 27, 08 at 19:37

We just bought a Big E for our home. We have a three story Victorian, that the dealer told us we should have no problem heating with the Big E. We have an oil burner with forced hot air that we are replacing with the pellet stove. The Big E is in the basement, with some ductwork running into the oilburner, feeding the hot air from the pellet stove into the oil furnace. We are trying to use the blower on top of the oil burner to blow the air from the pellet stove into the existing duct work into the house. This isn't working as well as the dealer would have led us to believe. Any suggestions on other ways to circulate the hot air to our upper two floors??

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Fireplaces Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here